How To Repair Smartbidet Leak

                                  SmartBidet SB-3000 Electronic Bidet User Manual                              

"Important safeguards/general cautions " are information that tin can protect the user from condom hazards and also prevent losses. Please be sure to read the manual correctly for proper usage.

• Delight read the manual carefully before installation and utilization.
• This product is made for the Usa and Canada.
• The role and design of the production may exist changed for quality improvements.

Important Functions

1 Of import SAFEGUARDS

• READ ALL INSTRUCTIONS BEFORE INSTALLATION AND Employ

The following terms are used in this manual to indicate hazards of varying degrees of severity.

DANGER Indicates an imminently hazardous situation which, if not avoided, will upshot in death or serious injury.
Alert Indicates potentially hazardous situation which, if not avoided, could effect in decease or serious injury.
CAUTION Indicates potentially chancy situation which, if not avoided, may result in minor or moderate injury or in damage to the product or other belongings.

DANGER – To reduce the risk of electrocution
Alert – To reduce the risk of burns, electrocution, fire, or injury to persons
PLEASE OBSERVE THE FOLLOWING PRECAUTION BEFORE USING THIS Product

CAUTION

– SAVE THESE INSTRUCTIONS –

2 CAUTION BEFORE INSTALLATION

WIRING REQUIREMENT
THIS PRODUCT MUST Exist PLUGGED into a regular voltage grounded GFCI outlet (North America 120Vac). The rated power consumption is 1400W. In locations where only a standard two-prong outlet is available, information technology is the responsibility of the user to install a grounded 3-prong outlet. Using a higher voltage is unsafe and may result in a burn down or other accident. This production is not responsible for damage resulting from the apply of information technology on other than specified voltage, or operating it without proper grounding.

WARNING

This Product must be on a split circuit. No other appliance should share the circuit with this product. Sharing a circuit could cause the branch circuit fuse to blow or the circuit breaker to trip. Continuous usage under these conditions could result in fire or property damage.

Basis INSTRUCTIONS
(1) This production has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and grounded. In the event of an electric short circuit, grounding reduces the risk of electric stupor past providing an escape wire for the electric current. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire. Bank check with a qualified electrician or service person if the grounding instructions are not completely understood, or if in doubtfulness as to whether the product is properly grounded.

(ii) This product is for use on a nominal 120Vac circuit, and has a grounding plug that looks similar the plug illustrated in sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle every bit shown in sketch B if a properly grounded outlet is not bachelor. The temporary adapter should be used only until a properly grounded outlet (sketch A) tin can be installed by a qualified electrician. The greenish colored rigid ear, lug, or the like extending from the adapter must exist connected to a permanent ground such equally a properly grounded outlet box embrace. Whenever the adapter is used, it must be held in identify by the screw.

This appliance has to exist earthed.

DANGER

IMPROPER GROUNDING CAN Event IN A RISK OF Electric SHOCK. Electric wiring has to be done in accordance with all local codes, or in the absence of local codes, with the National Electrical Codes.

The use of an extension cord is not recommended or advised. If information technology is necessary to utilise an extension cord, use only a three-prong extension string (i to one), and a 3 slot built-in GFCI receptacle that will accept the plug on this product. The marked rating of the extension string should exist equal to or greater than the electrical rating of the unit (10amp). Consult a qualified electrician or service person if y'all are not certain whether the unit is properly grounded.

three Identification

i MAIN UNIT

two ACCESSORIES

three Remote Control

Simple Performance Panel

Display

– When you sit down downwardly on this production, sit down in the center in society to actuate the sensor. (If the unit'south input water temperature is lower than 54(12.2C) , the h2o temperature could be lower than the above noted temperatures)

4 Operation (Basic)

Caution
Please press the "off" or "depression" push to reduce the seat temperature after using. Special precautions should exist taken for children, those who cannot accommodate the temperature, Caution and those who have sensitive skin.

(1) Bank check for whatever water leaks.

• Please plough on the water supply valve and check connected spots(ane~5) for the leakage.

(2) PREPARATION

• Please plug the power cord into 120Vac power outlet.
• Plug the unit of measurement into the proper power source and the LED power low-cal will kickoff flashing.
• Expect until the LED power light stops flashing and becomes solid red.
• The water tank volition be filled later pushing a button.
• When the water tank is filling the buzzer "Beeps" continuously. Later on the water tank is total, the cablegram will end with "1 Solid Beep".

CAUTION
Practise NOT ALLOW CHILDREN TO USE THE TURBO WASH or VORTEX WASH Function! SUPERVISION IS STRONGLY RECOMMENDED FOR THE ELDERLY OR OTHER PERSONS THAT MAY HAVE LIMITATIONS IN BODY Motion, Illness OR DISABILITIES!

three Operation

● Sit down DOWN ON THE SEAT

• When the digital sensor on the seat is activated, the functioning LED window on the chief unit volition low-cal "Occupied sensor" and simultaneously, the deodorizer fan will showtime to piece of work.
• Encounter folio 12 for details about changing the seat or water temperature.

● End

• Press this button to end all functioning.

● CLEANSING

• CLEANSING one. (Posterior Launder)
1- Printing "Posterior Launder"( ). Automatically, the nozzle comes out and sprays warm h2o to posterior.
two- Additional functions during your Posterior Wash feel are available. Come across Oscillation, page thirteen
• CLEANSING 2. (Feminine Wash)
i- Press "Feminine Launder"( ). Automatically, the nozzle comes out and sprays warm h2o to feminine area.
2- Additional functions during your Feminine Wash feel are available. See Oscillation, page thirteen
• CLEANSING 3. (Enema Wash)
1- Press "Enema launder"( ), the nozzle spray is more than or focused to produce the consequence of potent wash, to help stimulate bowel move.
ii- Printing "Water pressure level – High & Depression push button" to adjust the water force per unit area.

● CLEANSING cont.
CLEANSING 3. (Enema launder)

1. Press "Enema wash" Automatically, the water nozzle comes out and sprays a warm stream of water to the posterior center of the rectum.
2. If necessary, adjust "Position" of water stream with the ( )buttons.
3. Press "Water force per unit area High & Low button" ( / )to suit the h2o force per unit area to your desired comfort.
4. Press the "Finish" button when you lot feel your abdomen is full or wait until the "Enema wash" function stops, approximately 1 minute.
5. You volition shortly experience the urge to push the water out of your colon, push the water and feces out every bit thoroughly as you lot tin can.
6. Relax for a few minutes and be sure you feel your colon is empty so employ the "Posterior Wash" and "Air Dry out" part to finish.

5 Operation (Details)

● WARM AIR DRYER

1. Press "Dry out"( ), warm, dry air is gently directed to washed surface area for about 3 minutes.
2. You may adjust the warm air temperature past pressing Loftier( ) and Low( ) buttons.
   ❄ This product memorizes the air temperature of prior use.

● Water PRESSURE Adjustment

● WARM WATER TEMPERATURE AND SEAT TEMPERATURE ADJUSTMENT

● DEODORIZER
◼◾ Deodorizer ON/Off (initial setting is Off)

– Press button for() press the button once more for 3 seconds, the function is canceled.

– Later setting Deodorizer role, information technology is automatically activated when sensing the human body.

– Once used, the Deodorizer function automatically stops after 1 infinitesimal of operation.
Reference – Deodorizer function stops while dryer is selected. Later dryer part completes, deodorizer automatically is activated.

● OSCILLATION ( Nozzle Movement Function)

Car-Setting of Oscillation Feature
• You can set this function to automatically oscillate whenever the seat is occupied and the Posterior or
Feminine washes are in operation.
Step 1: Sit on this product.
Step 2: Press the "OSCILLATE"( ) push for iii seconds or until you hear a single Chime.
Stride 3: Sit down on the this product and go on with Posterior or Feminine Wash. Note: In the automatic setting, you may still conform the position of the Aquiver spray past pressing the
"Front"( ) or "Rear"( ) buttons.

Canceling the Automatic Oscillation function
Step 1: Sit down on this product.
Step 2: Press the "OSCILLATE"( ) button for 3 seconds or until you hear a double Chinkle.

● NOZZLE POSITION ADJUSTMENT

● Child Wash

• When pressing button, the unit volition automatically run Posterior Wash 3rd level for 30 seconds then Dryer third level for 1 minute. While using, if you press the stop button, the function will end.
• This function adjusts nozzle position and dryer temperature for a child'due south specification.
  The recommended minimum child 's historic period to use the bidet seat is 5 years old. We recommend adult supervision while the child is using the unit.

● Power ON/OFF

● ECONOMY (Free energy Save Mode)

◾ Saver On/ Off

– When pressing() the free energy saver LED on the master unit will plow on. (press push button again, the saver LED will plough off)
– Energy saver style automatically maintains a h2o and seat temperature of 89.six(32).
– When using bidet in saver mode, it is turned to automated saver.
– When you rise from the seat, it goes into saver mode.
– Seat temperature is maintained 32 ºC.

In energy saver manner, the seat heating temperature could appear to be lower than the actual temperature setting.

Other energy saver tips
In society to salvage free energy, delight abide by the following instructions:

– Go along seat encompass closed when not in use to forestall heat from existence lost.
– Keep temperature gear up to depression.
– Unplug the power cord if you do not plan to use the unit for a long menses of time.

● Dark Calorie-free on/off setting

– Press "Stop" and "Temperature" remote buttons simultaneously until night lite is turned on or off.

● Nozzle Cleaning (Automated)
– This product has an automated nozzle cocky-cleaning office that cleans the nozzle before and after each use.

6 Installation

CAUTION Earlier INSTALLATION

• This product requires 120V usage.
• Please do not plug in the electrical cord prior to installation.
• Please consult with a licensed electrician if electrical work is needed. In case a grounded outlet is not available, grounding should be washed in order to prevent short circuits or electric shock.

STEPS

(one) Plow Off Water.

• Shut off the water supply shut off valve.
• Drain the toilet tank completely.
• Then remove the existing fill valve water supply hose.

(two) Removing the existing seat and lid.

• Remove mounting bolts to release existing toilet seat from toilet.

(3) Connect T-Valve.

• Remove existing supply hose at the valve, connect T-valve with packing.

(iv) Connect T-Valve.

• Connect toilet tank supply hose to t-valve, apply supplied hose if existing hose is damaged.

❄ Cheque for whatsoever water leaks.

(5) Put the rubber nuts into the fixing holes of the toilet.

(6) Put the bolt into the commodities case and align information technology with the top of the base plate. Insert bolt with bolt case onto the base of operations plate. Afterwards this is done, insert it into the rubber nuts with screwdriver.

(7) Push the master unit of measurement onto the base plate until hearing "click" sound.

eight Connect the flexible tube from side of T-Valve to this production, Open up the Bending Stop valve to fill water.

❄Bank check for whatsoever h2o leaks.

❄Customers should use the new hose set provided with the product. Practice non use used set again.

(9) Wireless remote mounting guide.

Install wireless remote with adhesive tape

• Remove adhesive from back of subclass and place bracket where desired.

Inserting batteries

• Insert supplied batteries (1.5V AAA) and shut battery encompass.
  (Please check the polarity, before insert the batteries.)

(Please check the polarity, before insert the batteries.)

7 Water Draining / Separation Of Unit From The Toilet Bowl

Delight follow the instructions below when moving or separating the unit from the toilet for cleaning purposes.

(ane) Disconnect the ability plug.
(2) Shut the water supply valve.
(3) Push and agree the button on the right side of the unit to completely drain the water from the h2o tank.

(4) Loosen the nut on the hose that is connected to the unit, and then separate the electronic toilet seat from the toilet in the following guild equally illustrated.

• While pushing the push (surface area shown as an pointer) push the electronic toilet seat slightly toward to the forepart and and then the body unit will begin to slide out. Next, lightly pull the unit toward the front and it will disassemble from the toilet.

Practise not plough the seat upside-down. This tin can cause damage to the unit of measurement too as fire hazard.

(5) Disconnect the T-valve from the water tank.
(half-dozen) Connect the water hose to the toilet which was disassembled while installing the electronic toilet seat, and turn the water valve to the left to open it. See if there is any leaking from the water hose connection.
(7) Re-install the toilet seat and chapeau that was separated when installing the electronic toilet seat.

• As explained above, steps ane~4 are instructions for separation of the unit for basic cleaning purposes, and steps 5~vii are instructions for separation when moving, etc.

eight Maintenance

● CLEANING THE NOZZLE

● CLEANING THE BODY OF UNIT

• When you lot clean this product, do non employ thinner, benzene or toilet bowl cleaner. Information technology may crusade damage to the surface of unit of measurement.
• Use a wet cloth when yous clean this product.
• Practise non spray h2o directly on to this product.
• When you lot make clean this product, disconnect the power plug.

● CLEANING THE STRAINER
This product volition not operate properly if the strainer is chock-full. Delight clean the strainer regularly.
1) Close the water shut off valve.
2) Flush the toilet to empty the water reservoir.
iii) Unscrew the h2o filter nut.
4) Clean the strainer with a small-scale brush or h2o.
5) Re-spiral the h2o filter nut.
vi) Open the water shut off valve.

● MAINTENANCE FOR WINTER Flavor

• Cheque the ability cord if it is plugged in or not.
• Keep the water temperature on "Middle or High Level" to prevent water from freezing.
• If you practice not intend to use the unit for xiv days or longer, disconnect the ability plug and drain the water.

9 Trouble Shooting

ten Specifications

Information to the user
This equipment has been tested and constitute to comply with the limits for a Form B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference volition not occur in a particular installation. If this equipment does cause harmful interference to radio or boob tube reception, which can be determined by turning the equipment off and on, the user is encouraged to effort to correct the interference by one more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/Goggle box technician for help.

Alarm
Whatsoever changes or modifications not expressly canonical by the manufacturer could void the users dominance to operate the equipment and limited warranty.

Warranty

Hitrons Solutions Inc. Limited Warranty

Full general Express Warranty Covered Hitrons Solutions Inc will warrant to the original retail buyer but, which falls in normal user and within the applicable periods specified below. Hitrons Solutions Inc replacements volition exist warranted to the original purchaser of the products simply.
The Parts Warranty if the parts neglect within Twelve(12)months later on original purchase from authorized retailer, post-obit the installation manual and normal performance, Hitrons Solutions Inc will replenish replacement part(south) after warranty registration.

· This Warranty does non comprehend the following

1. Defects and/or malfunctions from failure to properly install, operate and/or maintain the unit in accordance with the installation manual.
2. Damage from corruption, fire, inundation, freeze, and whatever other acts of Nature.
3. Damage resulting from unauthorized alterations, attachments and/or repairs.
4. If the product was non installed properly.
5. Harm to the unit by animals, mice or insects.
6. Damage caused by excess moisture or from water clogging the bathroom or restroom.
7. Damage from not being installed in accordance with all applicable local codes, ordinances and good merchandise practices.
8. Color fading due to apply in wrong environment.
9. Damage from chemicals.
10. The warranty will not be covered without providing the date of purchase with original receipt.

———————————————————————-

WARRANTY REGISTRATION
To ensure your warranty protection, please complete and render this registration with a re-create of the original sales receipt to [email protected] or via post within 15 days subsequently data of purchase to validate your warranty. If you cull to transport through email, in the Subject area link, please write "Warranty Information: Your SmartBidet Series number"

Model_____________________

* Serial Number #_____________________

Purchaser ____________

Company______________
Address______________
City__________________
Country_______________

Dealer(Company)
___________________________ Dealer Code_______________
Address___________________________________________________

* The series number is located in the chapeau of the unit.

PLEASE Transport TO
Attn: Warranty Dept. Hitrons Solutions Inc. [email protected]

Service Department
Hitrons Solutions Inc.
Inquiries and Support
E-mail : [email protected]
Phone : ane-800-515-3430

Service Department
Hitrons Solutions Inc.
Inquiries and Support
E-mail : [email protected]
88 Portland Avenue, Suite M, Bergenfield, NJ 07621
Phone : ane-800-515-3430

2018 AUG 0.0

Documents / Resources

Source: https://manuals.plus/smartbidet/sb-3000-electronic-bidet-manual

Posted by: stackthspolies.blogspot.com

Share this post